2. Check the content. The quartz table is made of quartz crystal and resin, and the content of quartz crystal should be more than 93%. If not, the strength may be affected. When purchasing, you can view the test report provided by the merchant.
3. According to the density, there are two kinds of quartz stone: pressed plate and pressed by high temperature and high pressure. Inverted formwork, which is poured by the mold. In comparison, the pressed plate is denser, harder and more wear-resistant. If the grain size of the front and back of the stone is inconsistent, and the grain size of the back is large and the grain size of the front is small, it can be basically determined as the inverted template. If uniform, it is a pressed plate.
4. Scrape with a knife. Scrape the quartz stone table with a knife. If there is powder, the density is low and the quality is poor. If there is no powder, the density is high and the quality is good.
5. Bake over fire. Bake the quartz sample block with a lighter for a while and scrub it with water. If the yellow color cannot be wiped off, the quality is poor. What can be wiped off is of good quality, not afraid of scalding and high temperature.
Our cloud white quartz table top is 2-3cm thick and is made of more than 93% quartz stone pressed at high temperature. Its quality is harder, wear-resistant and durable. It is the best choice for kitchen people.
We are committed to making stones that people like!
